Personalised cushion

A unique creation made for a particular person!

aiming for a 15″ cushion I cut 3 x 16″ rectangles of red base material, one for my front and two for the back panel

For the decoration I filled a 12″ white fabric panel with heat and bond backed fabric shapes (cut on scan n cut from basic shapes library) and ironed them in place when I was happy with the layout. I then satin stitched around each shape to complete the panel.

I cut four strips of 2″ wide brown fabric – aiming for a wood frame effect and sewed them around the panel then ironed under the raw edge and stitched the whole onto my red front rectangle

to make up the cushion I folded 2″ under and under again on each of the back panels and top stitched the turned hem in place. I put the finished front piece face up and laid the back panels outside down on top so that the hems created overlapped in the centre. With lots of pins to keep everything square, I then sewed a half inch seam around all four sides.

turn inside out, press, job done!

No sew appliqué

scan n cut with heat and bond made this a doddle

this old pillow sis in the dog basket I made some while back. It needs an upgrade and I wanted to practice my scan n cut fabric cutting technique in it. The pillow and case are standard ones recycled to the dog bed so a bit of no sew appliqué does the upgrade and helps me practise for other projects.

simple instructions

iron heat and bond onto a piece of lightweight cotton. Mine was about 10″ by 6″ , I chose plain black because of the type style bit white on a patterned pillowcase  would work as well

peel off the paper backing and press on the scan n cut mat, set blade to 4, pressure and speed to  4 , let the machine cut out the design then peel fabric from the sheet

position the design on the ironed pillowcase, I used a ruler to line the letters up – I forgot I have some transfer tape to try out

when in desired position, cover with a cloth and hot iron to seal in place